Jacuzzi J - 495 Owner'S Manual Download Page 61

Page: 61 / 96

Page 55

J-400

1. From the “Water Care” Menu you can to set

the CLEAR

RAY

UV bulb timer, Figure 12.6c.

2. Tap or to change the days in 10-day

increments. The range is from OFF to 365

days. The CLEAR

RAY

UV timer counts down

by days not usage.

Note:

Note: It is not recommended that this fea-

ture be turned OFF. In order to continually have

the CLEAR

RAY

system effectively preform its function, it

should be program as instructed.

3. Tap to confirm and save your changes.

4. When the timer expires, a message will

appear on the control panel display, Figure

12.6d. The CLEAR

RAY

UV bulb

must be

replaced

(page 72) and the timer must be

reset. Tap “reset” and follow the instructions

above to reset the timer. If you tap “snooze”

the message will clear but the error icon

will display and the reminder screen will

reappear in 10 days.

5. Tap

to return to the “Water Care” Menu.

Tap again to return to the Settings Menu.

Programming the Water Change Timer

A programmable “Water Refresh” reminder can

be set to remind you when to drain and refill the

spa. Tap

Water Refresh

(Figure 12.6b) to enter

the Programming Menu.
1. From the “Water Care” Menu you can to set

the “Water Refresh” timer, Figure 12.6e.

2. Tap or to change the days in 30-day

increments. The range is from OFF to 180

days.

Note:

It is not recommended that this feature be

turned OFF. In order to continually maintain the

water healthy and clean, in addition to chemical

maintenance, it should be program as instructed.

3. Tap to confirm and save your changes.

4. When the timer expires, a message will

appear on the control panel display, Figure 12.6f.

The water must be drained and replaced with fresh

water. Follow the instructions above to reset the timer. If you tap

“snooze” the message will clear but the error icon will display and

the reminder screen will reappear in 10 days. Refer to Section 13.1,

page 61, for filter location.

5. Tap

to return to the “Water Care” Menu.

Tap again to return to the Settings Menu.

65 days left

add

days

CLEARRAY

Figure 12.6c

Reminder

It’s time to replace your

CLEARRAY bulb. Contact

your authorized dealer for

replacement parts.

snooze

reset

Figure 12.6d

60 days left

add

days

Water Refresh

Figure 12.6e

Figure 12.6f

Reminder

This is a general

reminder. Please change

your water soon.

snooze

reset

Summary of Contents for J - 495

































































































Search results

Summary of Contents for J - 495

Reviews:

Jacuzzi J - 495, Owner'S Manual, Page: 61 / 96

Search results

Summary of Contents for J - 495

Reviews: