manualshive.com logo in svg

Jacuzzi J - 495, Owner'S Manual, Page: 80 / 96

Share
Download
Jacuzzi J - 495 Owner'S Manual Download Page 80

Page 74

J-400

13. 

System Test 2: 

Reconnect the CLEAR

RAY

 unit to the controller. 

Turn breaker back ON. Turn on the pump to circulate the water 

through the CLEAR

RAY

 

System. Wait for 5 minutes and assure no 

water is dripping. If water is visible, STOP, fix the leak by repeating 

quartz tube maintenance process from step 1 through step 12. 

Make 

sure there is no water visible. Turn the pump and breaker OFF 

BEFORE proceeding to step 14.

14. Reconnect the UV bulb socket (6) to the power cord socket (4) make 

sure you use the latex glove provided when handling the UV bulb.

WARNING:

 

DO NOT TOUCH THE NEW UV BULB WITH 

YOUR BARE HAND.

 Oil on your skin will cause hot spot on 

the UV bulb and shorten the life of your UV bulb. Use the pro-

vided latex glove to handle the UV bulb.

!

15. Slide the new UV bulb (7) back inside the quartz tube.

16. Reinstall the black bulb boot (5) back over the quartz seal 

compression nut (9).

17. Reinstall the enclosure cover (2) and secure with the screws.

18. Properly dispose of the old UV bulb.

WARNING:

 This CLEAR

RAY 

System includes a UV bulb, 

which contains mercury. Dispose of the bulb in accordance 

with disposal laws. See www.lamprecycle.org.

!

19. Once power is activated you can check the ballast, 

Figure 14.5g, to see if the CLEAR

RAY 

System is 

functioning. The power on (red) light indicates that 

the CLEAR

RAY 

System is being provided power 

and should always be on. The lamp on (green) light 

indicates that UV bulb is activated.

15.0  Error/Display Messages

There are a number of unique functions designed into  

your Jacuzzi spa to protect it from damage and/or to aid in 

troubleshooting. When this occurs the spa will notify you by showing the 

screen below, Figure 15.0a. A solid white light indicates that all 

operations are normal. A solid red light indicates that immediate attention 

is required to clear or fix an error code. Following is a listing of all the 

possible messages along with their meanings. 

Always insist on 

genuine Jacuzzi replacement parts.

Note:

 If you tap   the display will change to Figure 15.0b. The error 

icon   will remain on the screen as a reminder. If the error is not taken 

care of or fixed, the error display will reappear in 2 hours, Figure 15.0a.

Figure 14.5g

DANGER!

TURN POWER 

OFF! DO NOT 

LOOK AT LIT BULB.

SEVERE EYE 

DAMAGE OR BLINDNESS 

CAN OCCUR!

Power

on

Lamp 

on

Summary of Contents for J - 495

































































































Reviews:

No comments