Page 51
J-400
Heat & Filter
= Heat and Filter:
Provides access to the heating and
filtration programming, page 51.
Water Care
= Water Care:
Provides access to the water care
programming, page 54.
WiFi
= Wi-Fi:
Provides access to the Wi-Fi programming, page
57.
Lock
= Lock:
Provides access to the spa lock programming,
page 57.
Time & Date
= Time and Date:
Provides access to the time and date
programming, page 59.
Language
= Language:
Provides access to the language
programming, page 59.
Units
= Units:
Provides access for the temperature display in
Fº
or
Cº
, page 60. Default setting is
Fº
.
= Back Button:
Tap to go back to the previous menu.
= Invert Button:
Tap to invert the display image.
= Scroll Buttons:
Scroll up and down to view the selections
available.
12.1 Programming the Heating Mode
Your Jacuzzi spa is equipped with 3 modes of
heating, Figure 12.1a. An automatic mode called
“Auto,” where the spa’s temperature is maintained
at all times. An energy saving heating cycle called
“Econo.” A mode that will only activate the heater
during the daytime called “Day” mode.
Note:
The heater will activate when the
temperature drops 2° from the set temperature.
Indicates that the feature is active. Indicates that the feature is not
active.
From the Settings Menu, tap or to highlight the “Heat & Filter”
menu tab in Orange. Tap
Heat & Filter
to the enter the menu. Then select
one of the heating settings.
A.
Auto heating:
1. When programmed to “Auto,” the spa will maintain the water
temperature to the set temperature. Heating will occur when
necessary.
2. To select this mode, tap next to the “Auto” icon.
Auto
Econo
Day
Filter
2
1
Heat & Filter
Figure 12.1a