63
X
(4) Release the button before pressing it again for a few sec-
onds (5).
5
~3”
4
X
The Turkish bath function is now available again, and the dis-
play is as shown below.
30/30
The first number below the “water-pitcher” symbol
(correspond-
ing to the number of Turkish baths already performed)
increases as
the “extra” Turkish baths are used
(max. 10)
, up to 40. Use of the
function is then restricted again.
Q
TT model
Press the “Turkish bath” button (it starts to flash). While it is flash-
ing, continuing pressing until you hear a beep (3).
1
~3”
2
3
beep
X
(4) Release the button before pressing it again and holding
for a few seconds (5), until it stops flashing.
~3”
5
6
4
X
The function is then available again
(press the respective but-
ton and it flashes briefly)
for 10 “extra” Turkish baths, after which
use of the function is restricted again.
Q
All models
After the first “manual release”, the scale-removal cycle can be
delayed again (again for a maximum of 10 “extra” times); this op-
eration can be repeated up to a maximum of 250 Turkish baths
(for the TOP model, however, the counter will continue to show “30”)
WARNING! the value 250 has been chosen for indica-
tive purposes only; this number of baths should NEVER
be reached.
WARNING! Delaying activation of the scale-removal
cycle may seriously compromise the efficiency of the
steam generator and create potentially hazardous
situations. Jacuzzi strongly recommends running the
scale-removal cycle every time it is indicated.
