• Never turn on the cleaner unless it is
fully submerged in the water. Doing
so will void the warranty and may
cause severe damage to the cleaner
motors.
• Do not use an extension cord to
connect the control unit.
• Ensure that children do not attempt
to access the cleaner while in
operation.
Connect Floating Cable
2
Submerge Cleaner in Pool
3
a)
b)
Never swim with the
cleaner in the pool.
Recommended entry
point in the pool
Hold the handle and
submerge in pool
a)
b)
Wait for bubbles to stop
completely, then let the
cleaner sink to the bottom
of the pool.
"CLICK"
"CLICK"
"CLICK"
"CLICK"
"Click"
1
full caddy assembly
instructions found
separately
GFCI
120V
5 ft. (1.5m) US
3m (10ft) Canada
c)
For optimal patterning and reduced cord
tangling, submerge the cleaner at the
recommended entry point in the pool.
Spread all of the length of cable out over the
pool to avoid tangling and ensure adequate
coverage.
4
Control Box Buttons
Start/Stop
cleaning
Select cleaning
mode
Remove cleaner
from the pool
