Jacuzzi booster KIT spa-pack, Installation, Use And Maintenance Manual

Page: 44 / 80

44
- Check that the water temperature is not too high.
- The “taratura sensore H
2
O” (H
2
O sensor setting) value may be too
low. Contact an authorized Jacuzzi® service centre.
X
The display indicates problems with the measurement
unit
- Check that the measurement unit is clean (refer to the section,
“Cleaning the measurement unit”).
- The spotlight (P) and/or (F) photosensor may be damaged. Con-
tact an authorized Jacuzzi® service centre.
F
P
X
The measurement data archive is empty.
- Check that the “step” parameter is not equal to 0 (refer also to sec-
tion, “Displaying and back-up of the measurement values”).
Structure of the menus
and the relative factory settings
1 - SETUP SYSTEM
DATE/HOUR SYSTEM
DAY/MONTH/ YEAR/ HOUR/ MINUTE
LANGUAGE
ENGLISH
PASSWORD
00000
DISPLAY
CONTRAST
88
BACK LIGHTEN. NO
SETUP RELAY
SETUP RELAY ALARM
ALARM TIME CL 0000
ALARM TIME PH 0000
DISAB.SET POINT
SI
2 - SETUP MEASURES
SELECT VALUE
SELECT CL2
SETUP CL2
RELAY OUTPUTS
SET POINT 1
ON 0.80 ppm
OFF
1.10 ppm
ON TIME
+000
OFF TIME +000
MODE RELAY
MODE RELAY
pwm
PWM PERIOD
30 sec
SET POINT 2
ON
0.80 ppm
OFF
1.10 ppm
ON TIME +000
OFF TIME +000
MODE RELAY
MODE RELAY
pwm
PWM PERIOD 30 sec
CURRENT OUTPUT
OUTPUT RANGE
4-20 mA
LOW LIMIT 0.00 ppm
HIGH LIMIT 5.00 ppm
CALIBRATION
CLHLORINE
AUTOMATIC
DEFAULT RESET
ANALYSIS LAG
LAG
10 min
SERVICE MENU
CHLORINE GAIN
4.00 ppm
CELL ALARM
on
WATER ALARM
on
SETUP ANALYSIS
TIME METHOD
WASHING TIME
35 sec
ZERO TIME
10 sec
STABIL.MEASURE 20 sec
AGITATION TIME 2 sec
REAGENT TIME
3 sec
REAGENT SETUP
REAG. ALARM off
SETUP RELAY aux1
3 min
OTHER SETTINGS
DEFAULT VALUES
MEASURE COUNTER
RESET COUNTER
MEASURE OUT SET SI
MAX.ZERO MEAS. 10
SELECT TEMP.
SETUP TEMP.
CURRENT OUTPUT
OUTPUT RANGE
4-20 mA
LOW LIMIT
0.00 ppm
HIGH LIMIT 5.00 ppm