![background image](http://html1.mh-extra.com/html/jacuzzi/booster-kit-spa-pack/booster-kit-spa-pack_installation-use-and-maintenance-manual_3194195040.webp)
40
(system settings); where this is not the case, subsequently press
the
“enter”
key
.
- Using the
T
key, select the
“impostazioni misure”
(measure-
ment setting)
menu and press “
enter”
.
- Using the
T
key, select
“selezione pH”
(pH selection)
and
press “
enter”
.
- Check that
“uscite relè”
(relay outlet)
has been selected and
press
"enter”
: The display will present
“set point1”
; press “
enter
”
once again.
- Ensure that
“on”
has been selected and press
“enter”
.
Using keys
S
/
T
, set the value
7.00 pH
.
- Press
“enter”
and select the
“off”
parameter; press
“enter”
once
again.
- Using keys
S
/
T
, set the value
7.40 pH
and press
“enter”
to
confirm the value selected.
- To exit from the menu and return to normal operation, press
“esc”
until
“exit”
appears on the display and then press
“enter”
.
At this stage,
“save?
": will appear on the display.
»
press
“enter”
once again to save the changes made;
» press
“esc”
to exit the menu without saving the changes made.
Additional keypad operations
Q
Activating/changing the password
WARNING: once the password has been set, it will be required
every time access to setting phases is needed.
- Press
“esc”
: the display should present
“impostazioni sistema”
(system settings); where this is not the case, subsequently press
the
“enter”
key
.
- Press
“enter”
to access the
“setup sistema”
(system setup)
menu; using the
T
key, select
“password”.
- Press
“enter”
once again: the display will present
“password: 0”.
Press
“enter”
again until the display presents the two available
options:
“stato password”
(password status) and
“nuova pas-
sword”
(new password).
- To activate/deactivate the password, ensure that
“stato pas-
sword”
(password status) has been selected, press
“enter”
and,
using the keys,
S
/
T
, select
“on”
or
“off”
respectively (when the
password is active, the symbol
appears on the display).
- To change the password, select
“nuova password”
(new pass-
word) and press
“enter”
: Using keys
S
/
T
, select the desired val-
ue to be assigned to the first figure and press
“enter”
once again.
Repeat this same operation for the remaining figures.
- Press “enter” for the final time, the display presents “nuova pas-
sword” (new password): at this stage, the password has been set.
- To exit from the menu and return to normal operation, press
“esc”
until
“exit”
appears on the display and then press
“enter”
.
At this stage,
“save?
": will appear on the display.
»
press
“enter”
once again to save the changes made;
» press
“esc”
to exit the menu without saving the changes
made.
Q
Adjusting the display brightness level
- Press
“esc”
: the display should present
“impostazioni sistema”
(system settings); where this is not the case, subsequently press
the
“enter”
key
.
- Press
“enter”
to access the
setup sistema”
(system setup) menu;
using the
T
key, select
“display”.
- Press
“enter”
once again: the display presents the two available
options:
“contrasto”
(contrast)
and
“retroilluminazione”
(back-
lighting).
- To adjust the brightness level, ensure that “contrasto” (contrast)
has been selected; press
“enter”
and, using keys
S
/
T
, select the
desired value.
Press
“enter”
once again.
- To adjust the time frame during which time the display remains
lit, select “retroilluminazione” (backlighting)
»
By selecting
“si”
(yes), the display remains permanently lit.
»
By selecting
“no”
(no) the display automatically switches itself
off after a minute passes since a key was pressed.
- To exit from the menu and return to normal operation, press
“esc”
until
“exit”
appears on the display and then press
“enter”
.
At this stage,
“save?
": will appear on the display.
»
press
“enter”
once again to save the changes made;
» press
“esc”
to exit the menu without saving the changes
made.
Q
Displaying the temperature/redox potential (rdx)
- Alternatively, to view the temperature and redox potential (rdx)
value, repeatedly press
“enter”
; the values will be displayed on
the bottom right.
Q
Displaying, set up and back-up of the values
- Press
“esc”
: the display should present
“impostazioni sistema”
(system settings); where this is not the case, subsequently press
the
“enter”
key
.
- Access the
“archivio”
(archive)
and/or
“grafici misure”
(meas-
urement graphics)
to view the chronology and diagrams relative
to the measurements made.
- In particular, by selecting “
first value
”, the display starts from
the first value and continues with the following ones.
By instead selecting “
last value
”, the display starts from the
last value and continues in reverse.
Finally,
the
“
date/time
” parameter is used to set the display,
selecting a certain day and time.
Summary of Contents for booster KIT spa-pack
