8/19
1. Introduction
SAFETY GUIDELINES – DEFINITIONS
This equipment was designed for spraying plants protection products approved
by regulatory authorities to be used in knapsack sprayers.
It is important for you to read and understand this manual. The information it
contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The
symbols below are used to help you recognize this information.
2. Specifications
Notice: Used without the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in property damage.
DANGER!
Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING!
Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION!
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
3.1. Unpacking
3.2. Instaling the agitator
3. Preparing the Product For Use
CAUTION!
Be careful when taking out the sprayer out of the carton
because the lever is loose and can cause damage or
personal injury. Note that the agitator is loose inside the
tank and must be properly assembly.
Model
PJH
Net weight
5.0 kg
Spray lance length
600 mm
Hose length
1350 mm
Dimensions (LxWxH)
406 x 206 x 565 mm
Chemical tank
Capacity
20 L
Filling opening diameter
140 mm
Material
Polyethylene
Pump
Type
Piston - dual cup
Maximum pressure
100 psi (6.8 bar)
Nozzle installed
Blue adjustable cone
Material
Brass
Lever
Tank
Accessories plastic bag
Rod
Hose with trigger
valve
Lance
locked
ring
Rod
Lever
Shaft
Washers
3.3. Installing the lever on the shaft and the rod on the
chamber top
Grease slighty the lever orifice and instal it on the rod. Fit a flat washer before the
locked ring.
WARNING!
Do not overtighten the screw cap.
3.4. Attaching the lance to the trigger valve
Lance
Trigger valve
Elbow
Lock
Hose
Trigger
valve
(A)
(B)
Mexedor
