18/52
13. Important Return Safety Instructions
If it is really necessary to return the sprayer for repair, always perform the following:
1.
Flush chemical residue from the pump, tank and hoses (performed in an
approved containment area).
2.
Circulate fresh water in the tank, pump and hoses.
3.
Tag the sprayer with type of chemicals that have been sprayed.
4.
Include complete description of operation problem, such as how sprayer
was used, symptoms of malfunction, how many working hours per day,
etc.
5.
Remove the battery from the sprayer and keep it in clean and dry condi-
tions. Battery must accompany the sprayer when it is returned for repairs.
Since the sprayer can contain residues of toxic chemicals, these steps are neces-
sary to protect all the people who handle return shipments, and to help identify
the reason for the breakdown.
MÁQUINAS AGRÍCOLAS JACTO S.A. shall warrant the equipment described in this
manual and shall repair or replace parts and components which, under normal
operation and wear, in accordance with technical recommendations, show DE-
FECTS IN MATERIAL OR WORKMANSHIP, based on the following conditions.
14.1. Warranty period
03 (three) years from the date of sale to the original purchaser.
14.2. Warranty application
JACTO shall honor this warranty, free of charge, if any part or component shows
defect in MATERIAL OR WORKMANSHIP, after final analysis at the factory.
14.3. This warranty shall be null & void in case of:
•
Misuse of the equipment against specifications in this manual, overwork or
accidents.
•
Use the equipment to spray products not intended for plants protection or
not approved by regulatory authorities to be used with knapsack sprayers.
•
Preventive/basic maintenance performed by unauthorized people.
•
Use of parts and components not supplied by JACTO.
•
Modification of the equipment or any characteristic of the original design.
14.4. This warranty shall exclude
•
PParts which show wear and tear due to use: spray nozzle, filters, seals, re-
chargeable battery, hydraulic pump, electronic panel, charger and its cables,
agitator lever, belt, UNLESS THEY SHOW DEFECTS IN WORKMANSHIP, AS-
SEMBLY OR MATERIAL.
•
Damages resulting from accidents.
•
Transportation or freight of the equipment, parts and components in case
such warranty is not approved.
•
Transportation and travel time of technicians.
14.5. General terms
•
Parts replaced within the warranty period shall be property of JACTO.
•
The warranty on replaced parts and components shall expire together with
the equipment warranty period.
•
Eventual delays in performing services shall not give the owner right either
to indemnity or to extension of the warranty period.
•
JACTO reserves the right to modify its products or to interrupt the manufac-
ture without prior notice.
•
Any suggestion, questions and complaints shall be submitted to CUSTOMER
CARE SERVICE: Dr. Luiz Miranda, 1650 ZIP CODE 17580-000 – Pompeia – SP –
e-mail: [email protected] – Office hours: Monday – Friday,
from 07h00 – 11h30 and 13h00 – 17h18.
14. Statement of Limited Warranty
Problem
Status
Analysis
Solution
Spraying was normal, but stopped
suddenly.
Electronic panel shows
battery overvoltage error
message.
Battery overvoltage.
Use JACTO original battery.
Battery completely discharged.
Charge the battery until the battery charge light turns green.
Electronic panel shows low
battery error message.
Pump or motor damaged.
Contact technical assistance.
The pump wiring is in short circuit.
Contact technical assistance.
Electronic panel shows
pump, motor or wiring crit-
ical fault error message.
Pump has reached maximum pressure;
pressure switch was activated.
Press the green button until the pressure drops. Clean nozzle
and filters.
Trigger valve wiring is poorly connected,
damaged or disconnected.
Check the trigger valve wiring.
Green button was pushed.
Pump wiring is poorly connected,
damaged or disconnected.
Check the pump wiring.
Dose/spraying variation.
Before calibration.
Sprayer is not calibrated.
Calibrate sprayer (via Jacto Smart Control App) an position the
spray lance as it will be used.
Hydraulic fluid release system is clogged.
Remove obstruction, clean pump, nozzle and nozzle filters.
After calibration.
Pump or hoses are leaking.
Contact technical assistance.
Agitator lever is activated.
Deactivate the agitator lever on the side of the sprayer.
Red button is pushed, but sprayer does not turn off.
Red button was not pushed long
enough.
Push red button and hold it down for 3 seconds.
Electronic panel is damaged.
Contact technical assistance.
Problem with mobile phone connectivity.
Using a mobile phone
within recommended
specifications (refer to the
App Manual).
Panel damaged.
Check if, when the sprayer is turned on, “FFFF” is displayed togeth-
er with sprayer information. If necessary, replace the panel.
