IMPORTANT INFORMATION TO THE USER
Before using the JACTO HIGH PRESSURE
CLEANING MACHINES, read carefully and follow strictly the
instructions given herein.
You must maintain all the decals in the right place and
replace any of them if illegible. Mind your work to prevent any
possibility of personal injury.
ATTENTION: THIS MACHINE IS NOT A TOY. THEREFORE DO NOT
ALLOW CHILDREN OR UNTRAINED PEOPLE TO USE
THIS MACHINE.
ON THE INSTALLATION
- Before installing the machine, make sure the local power supply circuit
is compatible with the machine voltage and frequency. On no account eliminate
the ground prong of the plug.
- Connect the plug only to properly grounded sockets.
- Never touch the socket or plug with wet hands.
- Check the electric cable before using the machine. If it is damaged,
replace it.
- The following may occur in locations of great voltage fluctuation:
1- The motor does not start.
2- The motor will be switched off during use.
In both cases, it is recommended to wait some minutes before
starting the motor again. If the problem persists, please call your dealer.
NOTE:
The machine will automatically be switched off in case of
motor overheat.
06
ELECTRIC DIAGRAM - MOD. 6800
27
C = Permanent Capacitor
M = Motor
B1 = On/Off Switch
Ground wire: to be connected to the ground prong of the plug.
Make sure the power supply circuit is protected against breakdown.
The wire to connect the plug must be 2.5 mm²; the ground wire must be 1.0 mm².
High Pressure Cleaning Machine (220 V)
Summary of Contents for 6500
Page 2: ......
