TROLLEY ASSEMBLY - MODEL 6500
HIGH PRESSURE MACHINES - MODELS 6500
A
B
C
A- Trolley asembly
12
Fastening
screw
M5 x 30
Necessary components to assemble the
tolley:
- 1 plastic handle;
- 1 metallic rod;
- 2 wheels;
- 2 caps;
- 1 support;
- 1 axle;
- 4 screws M5 x 30;
- 2 nuts M5;
- 6 locks.
Fastening
screws
M5 x 30
Nut M5
MAINTENANCE
NOTE:
BEFORE ANY MAINTENANCE, CONTACT
YOUR DEALER SERVICE.
PROCEDURE
Switch off the machine and disconnect the plug from
the power supply circuit before any kind of maintenance.
- Clean the suction filter whenever dirts
or other materials are preventing the
water from entering the pump.
ATENTTION:
ONLY USE JACTO
ORIGINAL SPARE PARTS.
THIS WILL ASSERT YOUR
RIGHT TO WARRANTY.
TYPE
SPECIFICATION
RECOMMENDATION
QUANTITY
All oils for internal
combustion engines within
this specification.
20 W 40
Lubricating
oil
3º- Use oil as specified in the table below.
The oil level can also be completed whenever necessary between the
changes recommended.
120 ml
- Change the oil every 400 working
hours or every six months, whichever
occurs first.
1º- Rotate the oil dipstick 1/4 and
pull it up.
2º- Turn the machine to empty
the oil reservoir.
Min.
Max.
21
Oil
dipstick
Summary of Contents for 6500
Page 2: ......
