Jacobsen ZA5 Series, Safety, Operation And Maintenance Manual

Page: 3 / 134

en-3
INTRODUCTION 2
2.1 IMPORTANT__________________________________________________________
The HM600 with diesel engine is a self propelled flail mower. With hydraulic systems to power the traction drive,
the cutting unit lift and lower, the cutting unit drives and the steering.
IMPORTANT: Do the maintenance indicated in this manual to make sure that the quality of cut is kept at a high
level.
This manual is part of the machine and must stay with the machine always. The suppliers of new, or used,
machines need to keep this documentation and supply the owners with a copy.
You must use the machine to cut the grass only and not for any other purpose. The compliance with these condi -
tions of the operation, service and repair specified by the manufacturer, are understood to be part of the correct
use.
ALL operators MUST read through this manual and understand the Safety Instructions, controls, lubrication and
maintenance procedures.
Make sure that you obey all safety and road traffic regulations.
You must not make any changes to the machine that are not approved by the manufacturer. This type of change
can release the manufacturer from the liability for any damage or injury.
Discard of worn parts in alignment with all local environment protection regulations. Use the local systems avail -
able in the country where the machine is used, for these recycled materials. When the machine is at its end of
life, there are guidelines in this manual for the removal of the machine from use.
Use only Ransomes Jacobsen genuine spare parts to meet the machine type approval regulations specified by
the European Union.
2006/42/EC
These instructions are the Original instructions confirmed by Ransomes Jacobsen Limited