Jacobsen SLF 1880, Technical/Repair Manual

Page: 52 / 236

3D-14
Fuel Filter Service
1. Shut off the engine and remove the ignition key.
Allow the engine to cool completely before servic-
ing.
2. Close the fuel filter valve (Figure 3D-9).
Figure 3D-9. Open Fuel Valve and Vent Plug
3. Thoroughly clean the fuel filter and area surround-
ing the fuel filter.
4. Remove the filter clamp ring (Figure 3D-10).
Figure 3D-10. Fuel Filter Assembly
5. Remove the filter element and drain the excess
fuel into an appropriate container.
6. Remove the o-rings.
7. Clean the inside and outside of the fuel bowl and
mounting.
8. Lightly lubricate the new o-rings with clean diesel
fuel and install in the mounting.
9. Install the filter element and bowl securely. Secure
with a clamp ring.
10.Open the fuel filter valve (Figure 3D-11).
Figure 3D-11. Closed Fuel Valve
11. Purge any air from the fuel system after installing
the new filter.
Fuel Valve Open Fuel Filter Vent Plug
O-Rings
Element
Bowl
Clamp
Ring
CAUTION
Dispose of fuel properly. Contact the local environ-
mental department for instructions on disposing of
unwanted fuel products.
!
Fuel Valve Closed