manualshive.com logo in svg

Jacobsen HR800, Safety, Operation & Maintenance Manual, Page: 31 / 122

Share
Download
Jacobsen HR800 Safety, Operation & Maintenance Manual Download Page 31

CONTROLS 4

en-30

4.2.23.11 DATE SELECT _________________________________________________________

Press the button 

 and the day is underlined.

Press the button 

 up and down 

 to move the count.

Press the button 

 to accept and move to the month (underlined).

Press the button 

 up and down 

 to move the count.

Press the button 

 accept and move to the year (underlined).

Press the button 

 accept

4.2.23.12 TIME SELECT__________________________________________________________

Press the button 

 and the hour is underlined.

Press the button 

 up and down 

 to move the count.

Press the button 

 to accept and move to the minute (underlined).

Press the button 

 up and down 

 to move the count.

Press the button 

 accept and move to the second (underlined).

Press the button 

 accept

4.2.23.13 DATE FORMAT ________________________________________________________

Press the Down 

 button to select the date format (underlined).

Press 

 to change the option.

Press the button 

 up and down 

 to move between US and EU.

Press 

 accepts the option.

Press   the button to return to main menu.

C l o c k   S e t t i n g s

D a t e     0 1   /   0 1   /   2 0 1 0

     Ti m e     0 1   : 0 1   : 0 0
      D a t e   F o r m a t     U S    

E U

C l o c k   S e t t i n g s

 

D a t e     0 1   /   0 1   /   2 0 1 0

 Ti m e     0 1   : 0 1   : 0 0

        D a t e   F o r m a t     U S    

E U

C l o c k   S e t t i n g s

 

D a t e     0 1   /   0 1   /   2 0 1 0

       Ti m e     0 1   : 0 1   : 0 0
 

D a t e   F o r m a t     U S    

E U

Summary of Contents for HR800



























































































































Reviews:

No comments