Jacobs Ladder LLC
4
Assembly Instructions
Take the following steps to assemble the RopeFit
1.) Remove the packing materials from the unit.
2.) Using a ½” wrench or socket, remove the 4 bolts securing the unit to the
shipping pallet.
CAUTION: To avoid injury and ensure your safety, be sure to get the
appropriate number of people to help you move the climber to its final
location. A fully assembled RopeFit is very heavy and you might injure
yourself if you move the unit improperly.
3.) Slide the unit off the side of the pallet and on to the floor.
4.) Roll the unit on its rear transport wheels to its new location by slowly tipping the
unit back to engage the wheel. Be sure to have assistance as unit is heavy.
5.) Extend the Vertical Rope Pulley arm up and secure it in place with the BOLT
and LOCKNUT provided. You will need a ¾” wrench to tighten the locknut.
6.) Adjust the TWO leveling footpads at the rear of the unit near the transport
wheels to add stability to the unit.
7.) Install the 4 Sleeve Anchors provided in the Owners Packet to secure unit to
the floor.
