Jackson TEMPSTAR HH S Installation, Operation And Service Manual Download Page 6

Page: 6 / 76

TempStar

HH-E

Door-type dishmachine; ENERGY STAR

qualified, electrically-heated,

high-temp, hot-water sanitizing, with booster heater.

TempStar

HH-E-VER

Door-type dishmachine;

ENERGY STAR

qualified,

electrically-heated,

high-temp, hot-water sanitizing, with booster heater and ventless

energy recovery system.

TempStar

HH-E NB

Door-type dishmachine; electrically-heated, high-temp, hot-water sanitizing,

no rinse booster.

TempStar

HH S

Door-type dishmachine; steam-heated, high-temp, hot-water sanitizing.

The manufacturer provides

technical support for all of

the machines detailed in

this manual. We strongly

recommend that you refer to

this manual before making a

call to our technical support

staff. Please have this manual

open when you call so that our

staff can refer you, if necessary,

to the proper page. Technical

support is not available on

holidays.

Contact technical support toll

free at 1-888-800-5672.

Technical support is available

for service personnel only.

NOMENCLATURE

Summary of Contents for TEMPSTAR HH S













































































Search results

Summary of Contents for TEMPSTAR HH S

Reviews:

Related manuals for TEMPSTAR HH S

Brands by name

Popular brands

Jackson TEMPSTAR HH S, Installation, Operation And Service Manual

Search results

Summary of Contents for TEMPSTAR HH S

Reviews:

Related manuals for TEMPSTAR HH S

Brands by name

Popular brands