Jackson AJX-44 Series Installation/Operation & Technical Manual Download Page 5

Page: 5 / 110

NOMENCLATURE FOR THE MODELS COVERED IN THIS MANUAL

AJX-44CE

AJX = AJX series of rack conveyors

44 = 44” wide machine

54 = 54” wide machine

66 = 66” wide machine

76 = 76” wide machine

80 = 80” wide machine

90 = 90” wide machine

CE = Electrically heated

CS = Steam heated

Model:

Serial No.:

Installation Date:

Service Rep. Name:

Phone No.:

Jackson WWS, INC. provides technical support for

all of the dishmachines detailed in this manual. We

strongly recommend that you refer to this manual

before making a call to our technical support staff.

Please have this manual with you when you call so

that our staff can refer you, if necessary, to the prop-

er page. Technical support is available from 8:00

a.m. to 5:00 p.m. (EST), Monday through Friday.

Technical support is not available on holidays.

Contact technical support toll free at 1-888-800-

5672. Please remember that technical support is

available for service personnel only.

Summary of Contents for AJX-44 Series















































































































Search results

Summary of Contents for AJX-44 Series

Reviews:

Related manuals for AJX-44 Series

Brands by name

Popular brands

Jackson AJX-44 Series, Installation/Operation & Technical Manual

Search results

Summary of Contents for AJX-44 Series

Reviews:

Related manuals for AJX-44 Series

Brands by name

Popular brands