INSTALLATION REQUIREMENTS
MODEL JP.24B/BF-ELECTRICAL REQUIREMENTS - SEE FIGURE - 1
IMPORTANT - PLEASE READ CAREFULLY - THE RINSE HEATER RELAY HAS BEEN TEMPORARILY
DISABLED SO THAT THE MACHINE'S INTERNAL BOOSTER TANK CAN FILL WITH WATER BEFORE
TURNING ON THE HEATING ELEMENT. A QUALIFIED SERVICEMAN MUST RECONNECT THE WIRE
(ORANGE/WHITE) TO THE RINSE HEATER RELAY COIL (TAGGED) AFTER THREE CYCLES OF OPERATION
AND THE WASH TANK IS FULL OF WATER. THE CIRCUIT BREAKER FEEDING THE UNIT SHOULD BE
TURNED OFF BEFORE DOING THIS.
DRAIN HOSE CONNECTION
Dishwasher has a pumped (pressure) drain capable of pumping waste water to a height of 24 inches from
floor to the kitchen's drain system. The dishwasher is supplied with a 8-foot long drain hose that extends
from the right rear side of machine. Drain hose must be installed indirect to kitchen's drain system with air
gap. It protects the dishwasher against water backing up in it if a drain clogs.
6
Summary of Contents for JP-24F
