DETAIL of the CONSERVER XL2 DATA PLATE
2
MANUFACTURER’S
LOGO
MODEL DESIGNATION
(I.E. “CONSERVER XL2”)
AMPERAGE LOAD
INFORMATION
MINIMUM PARAMETERS
(SEE NOTE 1)
UL LOGO (SEE NOTE 2)
MANUFACTURERS
ADDRESS INFORMATION
CSA LOGO (SEE NOTE 4)
NSF LOGO (SEE NOTE 3)
The data plate is located (standing before the unit) on the right side front corner, directly under the tub lip. Under no circumstances
should the data plate be removed from the unit. The data plate is essential in identifying the particular characteristics of your machine
and is of great benefit to installers, operators, and maintenance personnel. It is recommended that, in the event the data plate is
removed, you copy down the essential information on the final page in this manual for reference before installation. Do not use the
above data plate to represent your dishmachine. The data plate above is a generic representation used only to show you where to
locate information.
