16
Excellent Flames
: mostly blue,
small amount of yellow is okay;
flames are even sized and calm.
Problem Flames
: lifting off,
‘ghosting’
and disappearing;
check shutter settings. (see p. 20)
Problem Flames
: uneven,
blasting, noisy with lots of yellow;
check for burner blockage, foreign
material, insect nests (pp. 19, 20)
. . . . . . . . . . . . . . . . .
Main Burner
Figure 14
OFF setting
HIGH setting
& Ignition
◼
TO LIGHT MAIN BURNERS USING A MATCH OR BARBECUE LIGHTER:
(Temporary Solution when Ignition is disabled)
•
Read instructions before lighting.
•
Open the lid during lighting, and remove cook grids.
•
Turn all knobs to “OFF” then open the propane cylinder
valve, OR natural gas valve on your gas
connection. NOTE: Always keep your face and body averted when lighting.
•
A long stove match or BBQ lighter must be used to reach the burners.
•
Do NOT drop a burning match into grill for lighting purposes; hold the match in the desired spot.
•
Push and turn the main burner knob to the high position
, then release.
•
Light burner by match at the front end of the burner tube. Make sure the burner lights and stays lit.
•
If necessary, call your dealer or the Jackson help line, for assistance with repairing your ignition system.
◼
FLAME CHARACTERISTICS: (Fig. 14)
•
Check for proper burner flame characteristics. Each burner is adjusted prior to shipment; however,
variations in the local gas supply may mean subtle adjustments may be necessary.
•
Burner flames should be blue and stable. There should be no excessive noise, or flame lifting. If any of
these conditions exist please call your Dealer. If the flame is yellow, it indicates insufficient air. If the flame
is noisy and tends to lift away from the burner, it indicates too much air.
•
Note small yellow tips are okay
LOW setting
Figure 13
Summary of Contents for LUX Series
Page 23: ...23 Exploded View LUX JLS700 BUILT IN Model...
Page 26: ...26 Exploded View LUX JLS700 CART Model...
Page 54: ...54 Vue clat e LUX JLS700BI...
Page 57: ...57 Vue clat e LUX JLS700...