12
Installer Final Check List:
Ensure that clearances to combustible materials are maintained per specifications listed in this manual.
Make sure that all internal packaging has been removed.
Check that the burners are sitting properly on orifice end of the valves. (Pg.7)
Check grill label to confirm that the gas configuration matches the fuel being supplied
When using natural gas, ensure the appliance pressure (between NG regulator and main manifold) is at 4” WC
with a maximum 7”WC entering the regulator.
For propane grills confirm that inlet pressure is at 11” WC; NOTE that the original Jackson regulator and hose
are preset to 11” WC.
Ensure that all the gas knobs turn freely.
Leak test grill and all gas connections.
Grill test fired, and all functions working and in good order.
User informed of gas supply shut off valve location.
Owner’s manual given to grill user.
Fuel Conversion:
This grill is convertible to Natural Gas or Propane when needed, with the installation of the appropriate Gas Conversion
Kit (See parts list, Pg. 20-21). The kit should be installed by a qualified gas fitter. Please contact your local dealer for
information.
Grill Lighting Instructions:
1. BEFORE LIGHTING:
•
Always inspect the gas supply hose before turning the gas “ON”. If there is evidence of cuts, wear, or abrasion, it must
be replaced before use. Use only a manufacturer approved replacement hose.
•
Check all gas connections for leaks before each use. Do not light grill if gas odor is present.
2. TO LIGHT MAIN BURNERS OF THE GRILL: (see Fig. 7)
•
Read instructions before lighting (see labels on top edge of the pull-out grease tray)
•
Open lid prior to lighting your grill.
•
Turn all knobs to “OFF” then open the propane cylinder valve, OR natural gas valve on your gas connection. NOTE:
Always keep your face and body averted when lighting.
Optional Smoker Box
(SMOKERBOX)
or Pellet Diffuser
(JGPD-00)
