1
、
In the standby state, press key to enter the parameter
mode.
2
、
Press key and key to adjust the corresponding
parameter.
3
、
When the parameter have changed, parameter interface will
flash. Short press key to save the modified parameters. Long
press key to exit parameter interface, return to standby state.
29
200~5000
0/1
200~3000
200~3000
200~3000
0/1
3500
1
1800
1800
1800
0
28
1
2
3
1.Rotating the first screw of the motor grating film to fix flat.
Announcements of dismounting
the motor grating film
Announcements:
2.After replacing the grating film, need to make sure the left-
right position of the grating film, and don
＇
t touch the encoder.
3.Need to make sure the power lines are no connecting to
the electricity when install the control box.
Parameter
Adjustable
range
Electronic Parameter
System
default
Parameter description
the maximum speed of free
sewing (the maximum speed)
Needle position selection
(0:up; 1: down)
Start back tacking speed
End back tacking speed
P01
P03
P04
P05
Continuous back sewing speed
(W sewing)
Soft start switch (0: off; 1: on)
>
>
P
P
P06
P09
P
Manual Book of A4
Product Introduction
Summary of Contents for A4
Page 21: ...Notes Notes...
Page 22: ...Notes Notes...
