www.jaboboat.com Email: [email protected]
Phone:189 2833 0369
5
Compass Calibrate
Y
N
Compass calibration: When using the bait boat for the first time
or to another distant lake, you need to make new calibration,if
you have done this before,select No,and directly go to next step)
Press the "set start" key, select "Yes", and then press the "S" key
to confirm.
5 m offshore
When “5m offshore” appears,Control the boat to 5-10 meters
away from shore,press “S” to enter compass calibration.
Compasss left
“Compass left” means the boat auto turns left from 0-360
degree(1 circle),when the second circle completes,press the "S"
key to confirm.
Compass right
“Compass right” means the boat auto turns right from 0-360
degree(1 circle),when the second circle completes,press the "S"
key to confirm.
Compass Save
Y
N
"Calibration save",the default is "Y", after pressing "S",the
compass calibration data is saved.
Set Start
Y
N
It is very important to set the GPS start point. You need to
determine the GPS start position every time you use it. If not set,
the bait boat will not be able to return unless you manually
control it. Select "Yes" in this step. After the GPS start position is
established, a "*" icon will appear on the LCD screen, which
represents the starting position.
Please be noted that it takes 2-3 minutes for the boat’s receiver to establish a
connection with the satellite system. If the power-on time is too short, the connection
with the GPS has not been established. And after selecting "Yes", no "*" appears on
the LCD screen , it means that the starting position has not been established, you need
to wait for 2-5 minutes, and then select "Yes" until the starting position is established.
If it is established for a long time, you can press the N key to enter the navigation
setting page and select "Set the start": press the "S" key to complete the setting.
Set start,enter the operation interface:
Icon from first left to right:
1. Signal strength,full signal is 6 grills.
2. Remote control battery indicator
3. Boat battery indicator
4. Boat status(left,right or forward)
5. Satellite icon
In the second row,E means longitude,N means latitude.The "*" on the first digit on the
left indicates that the navigation module has started to work.
Before fully establishing contact with the navigation satellite, the latitude and
