www.jaboboat.com Email: [email protected]
Phone:189 2833 0369
15
This situation is mainly because the time to set the starting point is relatively short after the boat is
turned on, and the receiver has not received the GPS signal stably. Improved method After the
boat is turned on, delay 3-5 minutes to set the starting point, or press the N key to select the “set
starting point” option to reset the starting point after returning home.
2 How to check the distance traveled by the nest boat: Press the up key 3 times, the screen
displays:
0: XXXX m Here is 0; it shows the distance of the boat from the starting point
X: XXXX m X: shows the distance from the boat to the target point
3 What to do if the round-trip trajectory when navigating the nest boat is not a straight line, but a
curved curve:
It can be adjusted by "Compass Calibration" in the setting options. The specific method is:
press the S key to enter the setting state, and then press up twice to enter the "compass calibration"
If the boat is obviously to the left when navigating (returning), you can press -, and the value
can be adjusted from -1 to -30
You can set it to -10 first, and try to see if there is any improvement.
If the boat is obviously to the right when navigating (returning), you can press the + sign, the
value is adjusted from 1 to 30
You can set it to 10 first, and try to see if there is any improvement.
4 If you want to stop the boat during automatic forwarding or automatic navigation, press the A/H
key.
Compass Calibration
-10
罗盘校准
10
