background image

www.jaboboat.com Email: [email protected]

Phone:189 2833 0369

3

9. In order to be suitable for dawn or sunset/night fishing, the bait boat is equipped

with two different colors of tail lights. At night, the fisherman can also identify the

sailing direction of the boat according to the different colors of the indicator lights. In

order to help fishing at night, JABO3CG is equipped with a big night light in front

that can be remotely switched on and off anytime.

10.JABO3CG has the functions of detecting fish, measuring the depth of water.

Temperature.There’s also a lure light under the boat,just next to the fish finder.

11.JABO3CG is not suitable for use in the beaches, rapid flowing waters) and

environment with heavy wind and waves,or bad weather.

Technical Parameters:

Model Number-JABO3CG

1. Dimension: 615*265*180mm

2. Weight: 3KG (including 2*3.7V10A lithium battery);

3.4KG (including 3.7V20A lithium battery)

3. Power supply:

10A/3.7V lithium battery can work continuously for 2-2.5 hours

20A/3.7V lithium battery can work continuously for 3-4 hours

36A/3.7V lithium battery, can work continuously for 5-6 hours

4. Speed: 80 m/min

5. Remote control distance: 300 meters(1,000 meters between nesting positions).

6. Drive components: dual 380 motor gearbox drive (2AG), dual 545 motor direct

drive (3CG), built-in 4-leaf propeller.

7. Main orders: forward, back, turn right, turn left, release hook (releasing baits),

automatic driving in directional fixed distance, automatic positioning, automatic

nesting, automatic return. (3CG) Water temperature measurement, boat bottom lights

to lure fish, water depth measurement, fish detection (small and large fish can be

distinguished),

8. Bait bin load: 2-2.5 kg

9. GPS positioning, can store 16 target feeding positions.

10. Electronic compass orien satellite navigation, the error radius is 0-2M.

Remote Control Parameters

1.Remote control size: 165×42.5×96mm

2. Power supply: 3.7v lithium rechargeable battery.

3.LCD: FSTN128×128 dot matrix type

4.Screen size: 45mm×45mm

5. Sonar fish finder frequency: 200KHz (3CG)

Summary of Contents for Jabo-2AG/3CG
















Reviews: