3.5 Home arming
The installer can program particular detectors so that they will be automatically
bypassed in the so called “Home” partial arming. This allows for people to stay in
the particular part of the house after arming. To arm partially:
•
On the keypad
press home arming button
H
will indicate the Home partial arming on the keypad.
To disarm a partially armed system
-
enter your user code or press the or
button on the remote control.
3.6 Door opening
An electrical door lock (if installed) can be controlled via the alarm system.
•
Press the
door opening button
on the keypad to release the
lock.
3.7 Alarm memory reading
All events (arming, disarming, alarms, failures…) are recorded into the control
panel’s memory along with the time and date. The complete system history can be
viewed using a PC with Comlink software. Alarms and failures can also be viewed
on the keypad by entering:
F 4
- will show the last recorded alarm or failure. Press key 4 multiple
times to go deeper in to the memory.
3.8 Split system arming
The system can be split by the installer into two independent sections (A,B) and
a shared section (corridors, stairs, a main door…). This allows for a particular user
to arm and disarm only a particular section of the house with his/her code or
remote control (exactly as in a non split system). Arming of sections A and B is
indicated by
I I
symbols on the keypad. The shared section will be armed
automatically when A and B sections are both armed.
With the master code the supervisor can arm and disarm both sections. If the
master code is entered, the system will arm (if completely disarmed) or disarm (if
any section is armed).
Entering
F1 master code
will control only section
A
and
F2 master code
only
section
B
(this is true only when fast arming is disabled by the installer).
Note:
partial Home arming is not possible if the system is split.
Alarm system JA-63 „Profi“
- 7 -
MGK51504
Summary of Contents for Profi
Page 1: ...JA 63 Profi User manual...
