Programming sequences beginning with the
∗
key
∗
1
sets the entire system (the same as the ABC key)
∗
2
sets section A (the same as the A key)
1
)
∗
3
sets A and B, or just B (the same as the B key)
1
)
∗
4
event memory recall (key 4 scrolls backwards) – the control panel records the 255 latest events
∗
5
new Master Code/Card (
∗
5 MC NC NC) (MC- master code; NC – new code)
∗
6
access code/card programming (
∗
6 MC nn NC) (MC- master code; NC – new code)
∗
7
for operation while under duress (should be entered before the access code to secretly signal distress)
∗
8
PGX control (ON/OFF =
∗
81/
∗
80 or enter
∗
8 to trigger, if a pulsed switching reaction is
programmed)
1
)
∗
9
PGY control (ON/OFF =
∗
91/
∗
90 or enter
∗
9 to trigger, if a pulsed switching reaction is
programmed)
1
)
∗
0
To enter Service Mode (0
∗
SC – factory default 8080) or to enter maintenance mode (0
∗
MC –
factory default 1234)
1
) The functions allow the system to be operated from a mobile phone keypad (if the control panel is
equipped with the relevant communicator).
