had come in through a “main door”). This way you have enough time
for unsetting the system
(
22).
However if any other delayed detector
is activated the entrance delay will be shortened to a normal entrance
delay time.
•
If the
is
flashing on the keypad
and the display is showing which
device was triggered, it means that there was an
alarm.
Unset the
system and carefully check the reason for the alarm. Keep in mind that
there could be somebody hidden on the premises.
Alarm memory
–
flashing -
can be erased from the display by pressing button
#
An unsplit system (
1.)
•
Enter a code (present a card).
•
Use a key-fob: by pressing the
(or
) button you will unset the
whole system.
A system with partial setting (arming) (
2.)
•
Enter a code (present a card).
•
Use a key-fob: By pressing the
(or
) button you will unset the
whole system.
A split system (
3.)
•
Enter a code (present a card) or use a key-fob to unset the
corresponding system section.
5. To stop the alarm
If there is an alarm in the system it can be stopped by
entering a code
(presenting a card or using a
on the key-fob).
Alarm signalling – a flashing
and information about the reason for the
alarm – this can be terminated (after stopping the alarm) by pressing the
#
button. The
memory entry for the last alarm
can be displayed by pressing
∗
4
,
to scroll through the history keep pressing button 4.
Keep in mind that there could be somebody hidden on the
premises. If you have any doubts, then it is recommended
to have the premises checked by a security service from
the alarm receiving station.
Oasis user manual
7
MKE22102
