Jabiru j120, Technical Manual

Page: 233 / 233

Jabiru Aircraft
Pty Ltd
CASA APPROVED SECTION Airworthiness Limitations
Jabiru J160-C
REVISION 0 Dated 6th April 2012 Issued By: RAS Page: 233 of 233
C:\Aero_Craft_Australia\Jabiru\Jabiru_Documents_Edited\Generic_Tech_Mannual\Generic_Tech_Rev1_Unsigned.docx
Print Date: 8/05/2012 1:11:00 PM
23.4 CONTROL SURFACE BALANCING

The J160-C primary control surfaces are balanced during construction. In service there should
be no reason to rebalance the controls. Balance checks of the controls are only required after
repair or refinishing or at the 5000-hourly major airframe inspection.
Table 25
– Control Surface Balancing Limits
Control Hinge Moment Limits Weight Limits Manual Section
Rudder
17500g.mm
+/- 4000g.mm
2100g
+/- 100g
12.5 RUDDER BALANCE
Aileron
94000g.mm
+/- 4000g.mm
1150g
+/- 100g
9.4.4 AILERON
BALANCING
Elevator
259000g.mm
+/- 4000g.mm
4600g
+/- 100g
11.3.3 ELEVATOR
BALANCING
23.4.1.1 CABLES

Cables must be inspected as detailed in Section 4.16.
Table 26
– Mandatory Inspection Times
Description Part No. Interval (Hours)
Rudder Cable PC01404 1000
Elevator Cable PC3A001 1000
Aileron Cable (2) PC01614 1000
23.4.2 MANDATORY REPLACEMENT

The following components MUST be replaced at the intervals described hereunder.
Table 27
– Mandatory Replacement Times
Description Part No. Interval (Hours)
Rudder Cable PC01404 10 000
Elevator Cable PC3A001 10 000
Aileron Cable (2) PC01614 10 000