Aircraft Service Manual
Jabiru Aircraft
Pty Ltd
JTM001-1
J120, J160, J170, J200/J400, J230/J430, J250/J450 Variants
REVISION
1
Dated: Nov 2011
Issued By: SW
Page: 133 of 233
Figure 105
– Flap Cross Tube Assy J200 Family, Electric
10.5 FLAP POSITION INDICATOR
10.5.1 DESCRIPTION
2 different flap position indicators have been used in Jabiru Aircraft (plus the manual handle which
also acts as the position indicator for manual flap variants).
Both indicators consist of a cable-driven indicator which moves inside a housing. Indicators are
mounted to the windscreen / door pillars.
10.5.2 FLAP POSITION INDICATOR REMOVAL
1.
Undo screws holding indicator to “A” pillar.
2.
For Type 1 indicators: drill rivets and disassemble indicator.
3.
Loosen bolt on flap drive motor shaft & remove cable.
10.5.3 FLAP POSITION INDICATOR INSPECTION & REPAIR
Repair of the position indicator is limited to replacing worn or damaged parts.
10.5.4 FLAP POSITION INDICATOR INSTALLATION
Installation procedure is the reverse of the removal procedure outlined above.