Vibe 12
E
Control
1
Switching on the Vibe 12
Figure 4: On/off button
Press and hold the on/off button (8) for several seconds.
If the device was in sleep mode, it can be used immediately. If the device was switched off, then Windows 10 must be
started first.
See also
on page 17
Completely resetting the Vibe 12
on page 16
2
Charging the Vibe 12
The amount of time you can use your device without needing to charge it depends greatly on how you use it:
•
the audio volume
•
the time set before the device reverts to sleep mode
•
your Bluetooth and Wi-Fi use
If the device is used a lot, it is recommended to recharge it every day. To do this, use only the supplied power adapter.
The device can still be used while charging. A charge status between 40 % and 90 % increases the service life of the
battery.
Charge the device preferably at room temperature (about 20 °C / 68 °F). Temperatures lower than 5 °C (41 °F) and higher
than 45 °C (113 °F) can have a negative effect on the battery.
Figure 5: Connection for charging the device
1.
Check the power status. See
on page 11.
2.
Connect the supplied power adapter between the device (3) and the power supply.
See also
on page 11
E
Control
10
1
Switching on the Vibe 12
Summary of Contents for Vibe 12
Page 1: ...Vibe 12 Operating instructions...
Page 28: ......
