Jabbla Vibe 12, Operating Instructions Manual

Page: 18 / 28

Vibe 12
Figure 12: On/off button
Carry out one of the following actions to wake Vibe 12 from sleep mode:
• Press the on/off button (8).
•
Touch the touch screen in the top left corner.
NOTE
The option are available as standard in Windows 10. Advanced Windows 10 users can change these settings via
device management.
See also
Putting the Vibe 12 in sleep mode on page 15
Disabling sleep mode on page 19
8 Resetting the rear second display and loudspeakers
NOTE
It is also possible to completely reset the Vibe 12 (see Completely resetting the Vibe 12 on page 16).
CAUTION
Resetting is only permitted if the second display and/or the loudspeakers are completely unresponsive.
Figure 13: Reset button
Press the tip of a ball pen into the reset opening (11).
The display and loudspeakers are switched off. Restart the second display and loudspeakers and they are ready for use.
9 Completely resetting the Vibe 12
NOTE
If only the second display and/or the loudspeakers are not responding, you can reset these separately (see
Resetting the rear second display and loudspeakers on page 16)
CAUTION
Only reset the Vibe 12 when it has completely frozen.
E Control
16
8 Resetting the rear second display and loudspeakers