Tellus 5
1
Starting up the device
Press the on/off button (6) of the device.
If the device was in sleep mode, it can be used immediately. If the device was switched off, then Windows must be started first.
See also
on page 26
on page 25
2
Charging the device
The amount of time you can use your device without needing to charge it depends greatly on how you use it:
•
the audio volume
•
the time set before the device reverts to sleep mode
•
your Bluetooth and WLAN use
If the device is used a lot, it is recommended to recharge the device daily. To do this, use only the supplied power adapter. The device can still be used while
charging.
1.
on page 16.
2.
Connect the supplied power adapter between the device (12) and the power supply.
The battery charge indicator (8) will light up and remain amber while charging. As soon as the battery is fully charged, the indicator light changes to green.
Figure 5: The battery charge indicator
See also
on page 16
on page 32
on page 36
on page 38
E
Control
16
1
Starting up the device
Summary of Contents for Tellus 5
