16
www.jperkinsdistribution.co.uk
LIthIUM StOragE ChargIng
Use this program to bring the cells to a set voltage if you plan to store the battery pack for a period
of time. The voltages are 3.85 for LiPo, 3.75V for LiIo and 3.3V for LiFe. The charger will charge or
discharge the battery to the set voltage for that type of battery depending on the start voltage.
1. Select this charge process by choosing
Lixx StOragE
from the Lithium program menu by pressing
the “Start/Enter” button. The display should look similar to this:
The value on the left of the second line denotes the charge current and the value on the right of the
second line denotes the voltage and cell count of the battery pack to be charged.
nOtE: at this stage you need to ensure you have the correct type of battery selected for
the type you are about to charge, if you have the wrong type selected you need to exit the
charge program immediately and change the setting in the “USEr SEt PrOgraM” menu.
2. If you need to alter the settings for the charge press the “Start/Enter” button to make it blink then
change the value with “DEC” or “INC” button. The value will be stored by pressing “Start/Enter”
button.
3. Once the settings are correct press and hold the “Start/Enter” button to begin the charge process.
The display will now show similar to the following:
4. The charger will emit a sound to inform you when the charge process is complete. To stop the
charge process early press the “Batt type/Stop” button.
LiPo STORAGE
2.0A 11.1V(3S)
LI3s 2.0A 12.59V
STO 0.22:43 00682
