REV 12-1-20
5
Location and Preparation:
• Choose a location that is level for
the post to be installed.
• Make sure the location chosen will
not have any aerial disruption of
boom or interfere with any overhead
power lines, trees, etc.
• The area should have enough room
for the vacuum to be mounted next
to boom or mounted to the post and
be sure there is enough clearance
for cleanout doors to open.
• Below is a typical example of how the vacuum booms could be laid out. The
arrangement of the booms is up to the end user and should be determined
prior to construction.
• Please read the Installation Section of this manual to understand the boom
and vacuum configurations. Please take this into consideration when laying
out a site.
• Examine the location for the boom (s) to be mounted. Make sure that the
surface to be used is adequate to mount the booms. If new construction
please be sure to consult your contactor for footing adequate to handle the
mounting of the booms. See next page for footing specifications.
• For existing location see next page for footing information.
Summary of Contents for 75000-SWL Series
