11
INSTALLATION cont.:
–
Depending on how vacuum was mounted in previous steps, thread 2 inch vacuum hose into hose opening
of vacuum canister turning hose counter clockwise (model 9217 shown below). Thread until hose bottoms
out in plastic receiver inside vacuum canister.
–
Proceed to then insert hose up through opening in main post and pull out all excess slack until there is only
a relaxed loop of hose left between the vacuum and the post.
The goal is to not have excess slop and
not have the hose pulled so tight it binds or kinks.
REV 12-1-20
Thread hose
into inlet
counter-
clockwise.
Feed hose up
through post.
Summary of Contents for 75000-SWL Series
