13
6.3 FIRST USE WITH WATER MAINS CONNECTION
Make sure that connection to the mains water has been performed. Turn
the tap located under the drip tray (as shown below).
Then turn on the machine by placing the main switch in position “I” or “ON” (fig.
13, tab. 1).
7 WATER INPUT
7.1 FILLING FROM RESERVOIR
Fill the reservoir with clean, soft water (soft water= low calcium content, and
therefore less limescale, resulting in easier maintenance and a better result)
after having lifted the upper grill (fig. 1, tab. 2),
being careful not to spill water
into the machine.
If using the machine with reservoir, set the front tap located behind
the tray, (fig. 10, tab.1) to "reservoir".
In this case, make sure there is water in the reservoir.
7.2 FILLING FROM MAINS WATER
Connect the water inlet and outlet pipes (if there is a drain nearby, otherwise
leave the drip tray plugged) respectively to the water filling and the plastic
tray connections, as shown in figure 2 and figure 3 of tab. 2. Then turn the
