IXXAT CAN@net NT 200 User Manual Download Page 30

Page: 30 / 34

Support/Return Hardware

28 (32)

Support/Return Hardware

11.1

Support

►

For problems or support with the product request support at

www.ixxat.com/support

►

If required use support phone contacts on

www.ixxat.com

11.2

Return Hardware

►

Fill in the form for warranty claims and repair on

www.ixxat.com/support/product-returns

►

Print out the Product Return Number (PRN resp. RMA).

►

Pack product in a physically- and ESD-safe way, use original packaging if possible.

►

Enclose PRN number.

►

Observe further notes on

www.ixxat.com

►

Return hardware.

Disposal

►

Dispose of product according to national laws and regulations.

►

Observe further notes about disposal of products on

www.ixxat.com

CAN@net NT User Manual

4.01.0332.20000 1.7 en-US

Summary of Contents for CAN@net NT 200



































Search results

Summary of Contents for CAN@net NT 200

Reviews:

Related manuals for CAN@net NT 200

Brands by name

Popular brands

IXXAT CAN@net NT 200, User Manual

Search results

Summary of Contents for CAN@net NT 200

Reviews:

Related manuals for CAN@net NT 200

Brands by name

Popular brands