IXXAT CAN@net NT 200 User Manual Download Page 15

Page: 15 / 34

Installation

13 (32)

5.3

Checking and Updating the Firmware

5.3.1

Checking the Device Firmware

►

Make sure, that the latest VCI driver is installed.

►

Make sure, that the device is correctly connected to the host computer and to power supply.

►

Make sure that the latest CAN-Gateway Configurator is installed (check within support area
on

www.ixxat.com

►

Start the Ixxat CAN-Gateway Configurator.

►

Open menu

Scan

and select

All Ixxat devices

→

Connected devices and firmware version of the devices are shown.

5.3.2

Updating the Device Firmware

Whether updating is permitted via Ethernet or a password is needed, is defined in the
security settings of the CAN-Gateway Configurator. The default password is IXXAT. For
more information see user manual

CAN-Gateway Configurator

The firmware is constantly improved and expanded! Check if a newer firmware version is available
within the support area on

www.ixxat.com

To use all features the latest firmware versions of the CAN-Gateway Configurator and of the
CAN@net NT must be installed.

If the current firmware of the CAN@net NT in use is V4 or older:

►

See update package on

www.ixxat.com

for information about updating to V5 or contact

Ixxat support.

If the current firmware of the CAN@net NT in use is V5 or V6:

►

Check if newer firmware is available on

www.ixxat.com

►

Download and unzip the update package.

►

Make sure, that the device is connected to power supply.

►

Connect the device to the computer via USB.

►

Make sure that the latest CAN-Gateway Configurator is installed (check within support area
on

www.ixxat.com

►

Start the CAN-Gateway Configurator.

►

In drop down list

Select device type

select the device in use.

►

In drop down list

Select device version

select the current firmware version of the device

The device is only found if the selected firmware version matches the firmware version of
the connected device.

►

Scan for devices with button

Scan

and select the device in use in the combo box

Target

Device

►

Click button

Connect

►

Open menu

Target

and select

Read configuration from target

CAN@net NT User Manual

4.01.0332.20000 1.7 en-US

Summary of Contents for CAN@net NT 200



































Search results

Summary of Contents for CAN@net NT 200

Reviews:

Related manuals for CAN@net NT 200

Brands by name

Popular brands

IXXAT CAN@net NT 200, User Manual

Search results

Summary of Contents for CAN@net NT 200

Reviews:

Related manuals for CAN@net NT 200

Brands by name

Popular brands