Shipping Size / Weight -
• Crate -
87 inch W X 87 inch L X 65 inch H (2.2 m x 2.2 m x 1.7 m) / 1,500 pounds (680 kg)
Exact weight and dimensions varies dependent on machine configuration.
Materials of Construction - NSF/ANSI Standard 61-
T316 stainless
steel construction. Foam-filled high-density polyethylene (HDPE) floats.
Thermoplastic rubber intake hose. HDPE strainer.
The SB5000PW is NSF / ANSI
Standard 61 Certified, includes NSF/ANSI 61, Annex G.
Power Supply/Control System -
Photovoltaic (PV) Solar Panels , Battery and Electronic Controller are mounted on rack outside.
PV Solar Panels:
3 X 80-watt photovoltaic solar panels. Battery storage for day/night operation.
Electronic Controller:
D
igital solid-state controller, mounted in weather-tight (NEMA 4X) enclosure with internally fused
disconnect. SCADA output through RS-232 serial communication (Modbus RTU), DB9 male connection point inside enclosure.
Wireless options available, not included.
Wiring:
Corrosion-resistant industrial cord with molded watertight connectors that are indexed to prevent improper wiring.
Technology Description-
Floating, solar powered, circulation equipment for potable water reservoirs. Day/night operation on solar
only by utilizing a battery to store excess daytime power for nighttime operation.
Figure 1:
SB5000PW
Patent Pending
Subject to change without notice.
Maintenance / Warranty -
Minimal maintenance. Limited 2-year parts and labor warranty.
Drive System
-
High torque, direct drive (no gearbox), low voltage
brushless D.C. motor.
Minimum Operating Depth
-
At depths below 5 feet (1.5 m), the impeller
will be out of the water and the machine will stop circulating water. No
damage to machine when run dry in shallow water.
Fluid Intake Assembly -
Intake hose bolted to bottom of structural assembly.
Intake Hose :
20
to 60 feet (6 to 18 m) available in 16-inch (40 cm) diameter X 20 feet (6 m) sections.
Intake Assembly at Bottom of Hose:
Rectangular intake with openings around perimeter.
Intake Depth Adjustment:
No depth adjustment is necessary for fluctuations in water level. Intake draws water in a horizontal
layer within 1 inch (2.5 cm) of the tank or reservoir floor.
Rotating Assembly -
Removable assembly with easy access to impeller and impeller shaft.
Minimum Access Opening / Machine Size / Weight -
Machine can be assembled through 3 feet by 3 feet (92 cm by 92 cm) clear
opening. Assembled machine is 16 feet (5 m) in diameter and weighs 850
pounds (380 kg).
Flotation System
-
Three floats in triangular pattern each with an
adjustable float arm for proper vertical positioning, total float buoyancy of
1,400 lbs (660 kg).
Accessories Available -
(1) Portable Chlorine Boost System, (2) LED RPM Indicator, (3) Supplemental Power Kit, and
(4) Wireless SCADA Kit.
Chlorine Boosting -
Chlorine boost hose, accessible at top of reservoir spans down and connects to intake for fast chlorine
dispersion during in-reservoir boosting.
Minimum Head Space
- 20 inch (0.5meter) headspace is required.
©2022 IXOM Watercare Inc. | www.ixomwatercare.com | 866 - 437 - 8076 | [email protected]
Technical Data Sheet
SB5000PW
692_10275_20220110
O&M_SB5000PW_10272_20220119 - 51
