IWT Eventa L Tandem, User Handbook Manual

Page: 65 / 71

7.2.1.1 Jacking Points
1. Outer ends of the axles beside the springs.
2. Outer ends of the chassis cross members beside the chassis rails.
3. The rear most suspension mounting bracket.
7.2.2
Fitting Wheels
• Ensure wheel bolt threads and wheel seating surfaces
are clean and dry.
• Place wheel over locating rim on the hub.
• Tighten each bolt slightly and then tighten to the
torque figure given below, following the sequence
shown in the diagram to the right.
Bolt size: 5 x M14
Torque: 81 lb ft, 110 Nm, 11 Kgm
Socket size: 19mm A/F
Wheel bolts should be checked after the first 25 miles of
service and subsequently before every journey.