IWT Eventa L Tandem, User Handbook Manual

Page: 54 / 71

5.3.4 Repositioning
Repositioning the partitions is a two person operation. DO NOT attempt to do this on your own as
it may result in personal injury.
When moving and lifting a partition, a person is required at both ends. Hand access gaps in either
end of the skirting provide a position for each person to hold the weight of the partition.
Before moving the partition, plan ahead to where you are going to move the partition to, and
between you and your assistant, discuss who does what throughout the operation.
The person holding the back of the partition is the one in charge. Their job is to, instruct the
assistant holding the front of the partition, release the top pivot shoot bolt, lift the partition from
the bottom rail and relocate it.
The assistant holding the front of the partition, their job is to hold the weight of the partition, hold it
upright and move it as instructed.
Sequence:
1. Unhook the partition from the LHS retainer rail.
2. Fold the partition back towards the RHS of the trailer.
3. Check the floor pivot rail holes are clear of any debris that may stop the bottom pin
relocating.
4. Have your assistant keep hold of the front of the partition whilst the remaining operations
are carried out.
Continued on the following page.....