IWT Eventa L Tandem, User Handbook Manual

Page: 31 / 71

User Settings
Press to access the “User Settings” screen.
See below for a description of each option.
Navigation
1. You can scroll through the settings with the and buttons.
2. To edit a setting, highlight it then press to change.
3. If there are several options you may need to use the and buttons to change value.
4. Press to accept new value.
5. To exit, scroll to “Exit to main menu” and press .
Settings
Contrast
Adjusts the contrast of the LCD display if you are finding it difficult to read.
Sound
Enables or disables the sound when a button is pressed
Standby
Sets how long the control panel waits for a button press before going into standby.
Water Low
Enables or disables the warning alarm when the water tank is low.
Press to acknowledge an alarm that has triggered.
The warning will only re-arm when the water level increases by 25%.
230V Lost
Enables or disables the warning alarm when the 230V mains connection is lost.
Press to acknowledge an alarm that has triggered.
The warning will only re-arm when the 230V connection is restored.
Leis Batt Low
Enables or disables the warning alarm when the leisure battery voltage is less than 11V.
Press to acknowledge an alarm that has triggered.
The warning will only re-arm when the leisure battery is charged over 13V.
Shut down now
Pressing enter here will shut the control panel down into its low power mode. The master switch
will be turned off and the clock will lose its time. Pressing any button will turn the panel back on.
Firmware
Displays the current firmware version installed on the control panel.
Exit to Main Menu
Saves any changes to the settings and navigates back to the main menu.