HU
EN
positive feed of flux core wire without any deformation of the wire shape.
4.3.3 Wire Installation and Set-Up Guide
Again the importance of smooth consistent wire feeding during MIG welding cannot be
emphasized enough. The correct installation of the wire spool and the wire into the wire feed unit
is critical to achieving an even and consistent wire feed. A high percentage of faults with MIG
welders emanate from poor set up of the wire into the wire feeder. The guide below will assist in
the correct setup of your wire feeder.
(1) Remove the spool retaining nut.
(2) Note the tension spring adjuster
and spool locating pin.
33
Summary of Contents for 800MLTG2400PFC
Page 131: ...www iweld hu...
