Iwatsu Omega-Phone ADIX APS, Owner'S Manual

Page: 43 / 244

ADIX APS GENERAL DESCRIPTION - 29
IX-408
An IX-408 card provides eight digital station ports and four caller ID trunk
ports. The eight station terminal ports for DSS units and digital telephones
are connected through star wiring. Each port connects the station terminal
with a two-wire cable that carries bi-directional data transmission (ping-pong
transmission). The four caller ID trunk circuits interfaces the ADIX to four
Caller ID loop start circuits. This card may only be used in the ADIX-S and
ADIX-M systems.
Ports: 12 ports/card
Stations: IX-DSS-A-2, IX-12KTS/KTD, IX-12KTS/KTD + IX-12ELK,
IX-VTA, IX-DDPH, IX-MSGU (per channel), IX-BPAD, IX-
COMLINK, IX-COMLINK-2
Additional Power: None
Features for Caller ID:
600/900 Ohm impedance selection, Long/Short
distance selection
IX-044
An IX-044 card provides four station ports for on-premises single line
telephones and four digital station ports. The IX-044 includes the DTMF
receivers required for 2500 (Touch-tone) type telephones and provides a
hardware loop open feature for Voice Mail Integration. An optional IX-400
Caller ID Module may be added to the IX-044 card to provide an additional
four caller ID trunk ports. This card may only be used in the ADIX-S and
ADIX-M systems.
Ports: 8 ports/card (12 ports/card with IX-400 Caller ID Module)
Single-Line Stations: 500 (Dial Pulse) or 2500 (Touch-tone) type telephones
Additional Power: Ring Generator (IX-RNGU or IX-RNGUM)
Loop Limit: 600 Ohms
Digital Stations: IX-DSS-A-2, IX-12KTS/KTD, IX-12KTS/KTD + IX-12ELK,
IX-VTA, IX-DDPH, IX-MSGU (per channel), IX-BPAD, ,
IX-COMLINK, IX-COMLINK-2