To Activate / Deactivate or Change the Voice Mail
Monitor Mode:
þ
While your station is idle, press [SPKR]
þ
Press [FEAT]
þ
Press the [Voice Mail Monitor] key
þ
Press
1
to deactivate / activate Voice Mail
Monitoring.
Busy ICM Callback
When you call another extension and get a busy
signal, do not hang up
þ
Press the [FEAT] button and dial
43
or
þ
Press the [ICM CALLBACK] button (if assigned)
þ
Hang up after you hear a confirmation tone
When the busy extension becomes available, the
system will call you back
þ
Lift receiver
You are automatically connected to the extension.
Busy Number Callback
When an outside number you have called is busy,
you may tell the system to remind you to try again.
þ
Do not hang up
þ
Press the [FEAT] button and dial
24
or
þ
Press the [TRUNK CALLBACK] button (if
assigned)
þ
Dial the desired time you want to be called back
þ
Hang up after you hear a confirmation tone
After the set time, the system will call you back to
try again
þ
Lift receiver to automatically dial the number
To Cancel Busy Number Callback
þ
Lift the receiver
þ
Press the [FEAT] button and dial
024
or
þ
Press the [TRUNK CALLBACK] button and
*
þ
Hang up after you hear a confirmation tone
Call Coverage
Multipurpose buttons on digital multiline
telephones can be assigned as Call Coverage
buttons to indicate calls ringing at another extension.
If you have a Call Coverage button for another
extension on your telephone, you can answer calls
ringing at that extension by pressing the Call
Coverage button.
To answer a call ringing at another extension
When you hear the Call Coverage tone or see the
green Call Coverage lamp indication on your phone
þ
Lift the receiver
þ
Press the [CALL COVERAGE] button
þ
You will be connected to the call
To change the type of indication at your phone
þ
Do not lift the receiver
þ
Press the [FEAT] button
þ
Press the desired [CALL COVERAGE] button
The present indication mode will be displayed
þ
Dial the number for the desired mode
þ
Dial
1
for immediate display and ringing
or
þ
Dial
2
for delayed indication (display and
ringing starts if call is not answered within a
preprogrammed time)
or
þ
Dial
3
for no ringing (lamp indication only)
Call Pick-Up
Internal Group
You may answer calls to any extension in your pick-
up group without dialing the extension number.
When you hear a call ringing at another extension
þ
Lift receiver
þ
Press [FEAT] and dial
31
or
þ
Press the [GROUP CALL PICK-UP] button (if
assigned)
The incoming call is connected to your extension.
Direct Extension
You may also answer an incoming call at another
extension
þ
Lift the receiver
þ
Press the [FEAT] button and dial
33
or
þ
Press the [DIRECT CALL PICK-UP] button
þ
Dial the number of the extension where the call is
ringing
The incoming call is connected to your extension.
Conference
The ADIX system allows you to make conference
calls with any combination of up to four extensions
and outside lines on the same call.
