Making an Intercom Call
þ
Lift the receiver and wait for dial tone
þ
Dial an extension number
or
If your phone has a [DIRECT STATION SELECTION]
button assigned for the extension
þ
Lift the receiver and wait for dial tone
þ
Press the assigned extension button
Receiving a Call From Another Extension
When you hear the intercom call signal - either the
caller’s voice or intercom ringing tone
þ
Pick up the receiver, and the call is connected
or
þ
Speak into the microphone without lifting the
receiver
Making an Intercom Group Call
þ
Dial the Intercom Group access number when you
hear the Intercom Dial Tone
..
Putting a Call On Hold
When speaking on an outside line
þ
Press the [HOLD/DND] button
The active outside line button lamp flashes green
on your phone and red at other extensions.
If the call is not picked up, the call will ring again at
your phone.
Picking Up a Call On Hold
þ
Press the key with either the green or the red flashing
lamp to pick up the call being held on that line
Transferring a Call to Another Extension
When speaking on an outside line
þ
Press the [TRAN] button. You will hear a dial tone
þ
Dial an extension number
or
þ
Press an extension button (if assigned)
þ
Announce the call when the extension answers
þ
Hang up
911 Support
At default, ADIX is programmed to automatically
contact your local Public Safety Answering Point
(PSAP) when 911 is dialed. In addition, ADIX is one
of the only systems that supports Enhanced 911
Service. Enhanced 911 Service ensures that when 911
is dialed from a system extension, information that
allows the PSAP to identify the caller’s location in a
building is sent to the PSAP along with the call. Check
with your system installer or Authorized Iwatsu
Distributor to make sure your system is programmed
for Enhanced 911 Service.
Call Park
Park a call so that it can be reached from another
extension.
Putting a call in Call Park
When speaking on an outside line
þ
Press the [PARK] button
þ
You will hear confirmation tone and the [PARK]
button will flash green
If the call is not picked up, it will return to your
phone.
Picking up a call in Call Park
From the extension that parked the call
þ
Lift receiver
þ
Press flashing [PARK] button
From another extension
þ
Lift receiver
þ
Press [PARK PICK-UP]
þ
Dial extension number where the call is parked
to pick-up the call
Transfer to Park
You can transfer a call to another user’s individual
park on their telephone. The call can then be picked
up remotely from another telephone. The call can
also be picked up from the telephone where it is
parked.
Transferring a call to another user’s individual park
When speaking on an outside line
þ
Press [TRAN] + [PARK]
þ
Dial the number of the extension where the call is
to be parked, or press the extension button (if
assigned)
þ
When you hear confirmation tone, hang up
þ
The [PARK] key on the user’s phone will be lit
þ
If desired, Use the paging system to inform the
user of the call parked on their telephone
Picking up a call parked on your individual park
from your telephone
þ
Lift the receiver (handset)
þ
Press [PARK]
Picking up a call parked on your individual park
from another telephone
þ
Lift the receiver (handset)
þ
Press [PARK]
þ
Dial the number of the extension where the call is
parked, or press the extension button (if assigned)
or
