7
system reset
There may be times when you need to reset your unit back to the factory settings. If you
experience reception problems you may want to reset and try again. If you move the unit
to another part of the country and pick up the local and national DAB stations in that area,
your previously tuned channels may no longer be available.
To do the system reset, press and hold the
MODE
button. Then press the
ENTER/
button to start the system reset. The unit will then start the Quick Scan for DAB channels
immediately.
software version
1. Press and hold the
INFO
button for 2 seconds and then release it to view the software
version of this unit.
2. The software version will automatically disappear after 5 seconds.
In FM mode, press the
INFO
button again within 5 seconds to display the Program
Identification Code (PI Code). The information will automatically disappear after 5 seconds
or press the
INFO
button again to exit. This information will only display if you are listening
to a station broadcasting a RDS signal. With a station without RDS <PI code> is displayed.
Programme Identification(PI) is the unique code that identifies the station. Every station
receives a specific code with a country prefix.
After the system reset, all the tuned stations, DAB & FM preset stations and alarm settings will
be erased.
iPHDKDB10_IB_110920_Zell.indd 7
20/09/2011 11:05 AM