- 29 -
■ Periodic inspection
To ensure efficient and smooth operation, perform periodic inspection. Be careful not to damage internal
sliding parts and plastic parts when dismantling the pump.
• Inspect the pump every six months, logging inspection records.
• For 24-hour continuous operation, inspect the pump every two months.
• Be sure to turn off power before dismantling the pump. Replace wear parts according to estimated parts life.
The magnetic force of the drive magnet and magnet capsule is strong. Be careful not to catch the finger. Do
not put electrical devices such as a watch and mag card close to the magnets.
Interval
Every six months
(Maintain an
inspection record)
Part names
(Drive magnet unit)
Drive magnet
Hex. socket set screw
Rear casing
Rear thrust
(Magnet capsule unit)
Magnet capsule
Bearing
(Impeller unit)
Impeller
Mouth ring
Front case
Rear case
Liner ring
Spindle
Inspection items
● Wear trace
● If the drive magnet is correctly
mounted by hex. socket set
screws and they are not loose.
● Decentering of magnet and
motor shaft (Max.1/10mm)
● Wear tracks on an inner surface
● Cracks
● Rear thrust wear degree
● Contamination in rear casing
● Wear tracks on the rear end or
side face of the magnet capsule
● Cracks on the rear end or side
face of the magnet capsule
● Bearing wear degree
● Loose fit of the impeller unit
● Mouth ring wear degree
● Cracks
● Contamination in the impeller
● Impeller deformation
● Contamination
● Cracks
● Wear degree, cracks and wear
tracks on liner ring
● Swelling or a crack on O ring
● Wear tracks on an unlikely portion
● Cracks
● Wear degree
Measures
○ Finding wear trace, contact us.
○ Reset the drive magnet to the
motor shaft and retighten the
screws.
○ Retighten the hex. socket set
screws or replace the drive
magnet (Contact us).
○ Contact us.
○ Replace as necessary.
○ Contact us.
○ Remove contamination.
○ Contact us.
○ Contact us.
○ Replace as necessary.
○ Replace or contact us.
○ Replace as necessary.
○ Replace as necessary.
○ Remove contamination.
○ Replace as necessary.
○ Remove contamination.
○ Replace as necessary.
○ Contact us.
○ Replace as necessary.
○ Contact us.
○ Replace as necessary.
○ Replace as necessary.
Maintenance