Settings
6 720 642 838
(2010/03)
27
9.1
Menu overview
Under
Settings
there is:
General
No settings for cooling
Circuit 1 Heating
No settings for cooling
Circuit 1 Cooling
Primary cooling circuit
Allow cooling in winter operation
Outdoor temperature limit for cooling
Room sensor
Room temperature
Room temperature change in cooling mode
Cooling/heating change over delay
Room temperature hysteresis
Acknowledge anti-freeze sensor T32
Flow sensor
Dew point sensor installed
Minimum set point value T1 at cooling
Regulator settings
Circuit 2, 3...
Mixing valve mode
Heat curve
(mixing valve mode is heating or heating/cooling)
Type of heating system
Flow temperature at minimum outdoor temperature
Parallel offset
Highest permitted flow temperature T1
Lowest permitted flow temperature T1
Cooling
(mixing valve mode is heating/cooling or cooling)
Allow cooling in winter operation
Outdoor temperature limit for cooling
Room temperature change in cooling mode
Cooling/heating change over delay
Room temperature hysteresis
Dew point sensor installed
Minimum set point value T1 at cooling
Regulator settings
Tab. 11 Room temperature, cooling settings
External input prim. cooling circuit
Block cooling
External input circuit 2, 3...
Block cooling
Tab. 12 External input, cooling
Temperatures
Display and correcting temperature sensor
Outputs
Manual operation time
The status of pumps, three-way valves, mixing valves, etc., is dis-
played
Circulation pumps
Collector circuit pump G3 active in cooling
Tab. 13 Installer, cooling
Summary of Contents for PKS 1000
Page 35: ...6 720 642 838 2010 03 35 Notes...